New timber-framed home, Tascott
Full structural engineering for Richard's own home. Its 3.5 m high walls were designed to AS 1720.1, and with very few internal walls the house works as a stressed-skin box.
Residential engineering
For homeowners, building designers, architects and builders. From removing a wall to a new home on a steep, waterfront or bushfire-prone block, we design structure that's economical to build and easy to certify.
Most houses need some engineering, even when much of the framing comes from the span tables. Typical jobs:
Scaled to the job: a single beam might need one detail and a certificate, a new home a full structural set.
Footing and slab design to AS 2870, based on the site classification from your geotechnical report.
Timber framing to AS 1684 and AS 1720.1, and steel beams and posts to AS 4100, wherever the job goes beyond the span tables.
Piers, suspended floors and retaining for steep blocks; durability detailing for waterfront exposure; and structure that suits the BAL construction requirements.
A structural drawing set produced from a Revit (BIM) model, coordinated with your architectural drawings.
A structural design certificate and the documentation your certifier needs for the Construction Certificate or Complying Development Certificate.
Footing, reinforcement and framing inspections during construction, with inspection certificates where your certifier requires them.
Drawings, photos, a survey or even a sketch. That's enough for us to understand the job and scope it.
We confirm what needs engineering, what you'll receive and when, and give you a fixed fee.
We work directly with your designer, builder or fabricator to keep the design economical and buildable.
Revit-produced drawings and a design certificate for your certifier, with inspections during construction where they're needed.
Email drawings, photos or sketches to info@three16.com.au, or call 0405 516 358 to talk it through first.
Full structural engineering for Richard's own home. Its 3.5 m high walls were designed to AS 1720.1, and with very few internal walls the house works as a stressed-skin box.
Structural advice to a homeowner on a new deck and on enclosing an existing carport as a garage, on a BAL-40 bushfire site.
More on Richard's background in the capability statement and his full CV.
If the wall is load-bearing, yes. It will need a beam, and the load has to be carried down to the footings. Send us photos and a floor plan and we'll tell you whether it's load-bearing and what's involved.
For new footings and slabs, usually yes. The site classification sets the footing design. On steep sites the geotechnical engineer also advises on slope stability and pier founding. We can recommend geotechnical engineers if you don't have one.
The BAL rating mostly drives materials and construction details: what can be exposed, what must be non-combustible, and how decks and subfloors are enclosed. We design the structure to suit those requirements from the start, rather than retrofitting them.
We're based on the Central Coast of NSW and work with clients across Australia. Locally we're on site quickly; further afield we work from drawings, photos and site visits as the job needs.
Send through your plans, photos or a sketch and we'll come back with what needs engineering, a fee and a timeframe.
Send them to info@three16.com.au.