Retaining walls & pools
Structural engineering for retaining walls and pools
For homeowners, landscapers, pool builders and builders. Walls and pools that suit the ground they're in and the structures around them.
When you need an engineer
Most retaining walls over a modest height, and most pools, need engineering. It matters most when:
- A wall retains a driveway, house or boundary
- The site is steep, or the ground is soft, sandy or wet
- A pool sits near a retaining wall, boundary or footing
- A pool is elevated, cantilevered or on a suspended slab
- There's a sloping backfill or a load behind the wall
- Existing walls are leaning, cracking or bulging
- You're choosing between block, concrete, sleepers or piles
- The certifier or council has asked for engineering
What you get
Designs that suit the ground, the access and how the job will actually be built.
Retaining wall design
Concrete block, reinforced concrete, sleeper and soldier-pile walls to AS 4678, with drainage and footing details.
Pool structure
In-ground and elevated pool shells to AS 2783 and AS 3600, with checks for nearby walls, boundaries and footings.
Ground input
Design based on your geotechnical report, or advice on the geotechnical investigation the site needs.
Revit drawings
Construction drawings from a Revit (BIM) model, with clear reinforcement and drainage details.
Certification
A structural design certificate and the documentation your certifier needs for approval.
Inspections
Footing, reinforcement and pre-pour inspections, with certificates where required.
How it works
- 01
Send what you have
Drawings, photos, a survey or even a sketch. That's enough for us to understand the job and scope it.
- 02
Scope, fee and timing
We confirm what needs engineering, what you'll receive and when, and give you a fixed fee.
- 03
Design and coordination
We work directly with your designer, builder or fabricator to keep the design economical and buildable.
- 04
Drawings and certificate
Revit-produced drawings and a design certificate for your certifier, with inspections during construction where they're needed.
Email drawings, photos or sketches to info@three16.com.au, or call 0405 516 358 to talk it through first.
Common questions
How high can a retaining wall be without an engineer?
It depends on your council's rules and on what the wall is retaining. Walls that support a building, driveway or boundary usually need engineering even when they're low. Check with your certifier, or send us the details and we'll advise.
Can a pool go next to a retaining wall?
Yes, but the two have to be designed together. The pool loads the wall, and excavating for the pool can undermine it. We check both and detail them to work with each other.
My retaining wall is leaning. Can it be fixed?
Sometimes it can be stabilised; sometimes it needs replacing. Drainage is often part of the cause. Send photos and we'll tell you whether it needs a site visit.
Where do you work?
We're based on the Central Coast of NSW and work with clients across Australia. Locally we're on site quickly; further afield we work from drawings, photos and site visits as the job needs.
Planning a retaining wall or pool?
Send through your plans, a site survey or photos and we'll come back with a fee and a timeframe.
Send them to info@three16.com.au.